> ## Documentation Index
> Fetch the complete documentation index at: https://docs.alvys.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Distance To Final column (Drivers/Assets table)

> What the Distance To Final column in Dispatch Planner v2 shows, how to set the place it measures from, and why it appears and disappears on its own.

Part of the [Dispatch Planner column reference](/en/help/loads-trips/dispatch-planner-columns).

The **Distance To Final** column shows how far each driver's **Final Stop** is from a place you choose, in miles. It appears only while you filter the **Final Stop** column by a place and a radius. Use it to sort drivers by how close they will finish to a trip's pickup.

## At a glance

| | |
| - | - |
| **Table** | Drivers/Assets |
| **Shown by default** | No. It is not in the column configuration menu. It appears on its own while the **Final Stop** column has a place-and-radius filter, and hides again when you clear that filter. |
| **Sort** | Yes |
| **Filter** | None. Filter the **Final Stop** column by place and radius instead. |
| **Who sees it** | Only accounts that still use the earlier availability columns, because it depends on the **Final Stop** column |
| **Edit in the grid** | No |

## How do I set the place it measures from?

The column measures from the place set in the **Final Stop** filter. There are two ways to set it:

* **Set it yourself.** Open the filter on the **Final Stop** column and search for an address or place. The radius starts at 100 miles. To change it, pick 25, 50, 250, or 500 miles.
* **Use Find drivers.** When you click **Find drivers** on an **Open** or **Covered** trip, the planner sets the place to the trip's pickup with a 250-mile radius.

To hide the column, click **Reset** in the **Final Stop** filter.

## How is the distance worked out?

The distance is a straight line between the place you picked and the driver's **Final Stop**, not driving miles. It is shown in miles with up to three decimal places.

If the **Final Stop** cell shows a driver event's address, the distance is measured to that address.

## Why is the column blank?

**The driver's final stop has no location on the map.** The planner cannot measure a distance without one. A place-and-radius filter also leaves these drivers out, so you will rarely see a blank value.

## Related

* [Final Stop column](/en/help/loads-trips/dispatch-planner-columns/drivers/final-stop)
* [Available column](/en/help/loads-trips/dispatch-planner-columns/drivers/available)
* [Distance To Current column](/en/help/loads-trips/dispatch-planner-columns/drivers/distance-to-current)
* [Dispatch Planner](/en/help/loads-trips/dispatch-planner)